Usb Interface For Mac

Best Usb Audio Interface
Usb Guitar Interface For Mac
Guitar Usb Interface For Mac
Digital Audio Interface For Mac
Best Usb Audio Interface For Mac
Usb Recording Interface For Mac

All Focusrite USB 2.0 interfaces are 'Class Compliant', which means that they can be connected to a Mac computer without needing to install a separate driver. The Scarlett Solo, 2i2 and 2i4 (1st and 2nd Generation) and the Saffire 6 USB (the USB 2.0 variant, more details at the bottom of this article) are plug and play on Mac computers, there's no need to install anything at all. Line 6 USB Interface Analog In Audio/MIDI Interfaces, USB Interface PC/Mac Compatible Live & Studio Mixers, Line 6 USB Interface Line TS 1/4' Audio/MIDI Interfaces, Line 6 USB Interface Line TRS 1/4' Audio/MIDI Interfaces, Digital PC/Mac Compatible Live & Studio Mixers with USB Interface, Pod Xt Live, USB Interface Line XLR Audio/MIDI.

The adapters and cables in this article work with these Mac computers and iPad Pro devices:

Mac models that have Thunderbolt 3 ports. These ports support both Thunderbolt 3 and USB-C connections.
Mac models that have a USB-C port. This port supports USB-C connections.
iPad Pro models that have a USB-C port. This port supports USB-C connections.

To find the right cable or adapter for your Mac or iPad Pro, use the information below to identify the connector on the end of the cable coming from your display, hard drive, camera, hub, or other device. Check the end meant to plug into your Mac or iPad Pro.

Thunderbolt 3

If you're using an Apple Thunderbolt 3 cable or other Thunderbolt 3 cable with your display or other device, it will connect to your Mac without an adapter.

The Apple Pro Display XDR and LG UltraFine 5K Display use Thunderbolt 3.

USB-C

If you're using a mophie USB-C Cable with USB-C Connector or other USB-C cable with your device, it will connect to your Mac or iPad Pro without an adapter.

The LG UltraFine 4K Display uses USB-C.

USB-A

If you're using a USB-A cable with your device, use the Apple USB-C to USB Adapter, the Apple USB-C Digital AV Multiport Adapter, the Apple USB-C VGA Multiport Adapter, or another USB-C to USB-A adapter to connect your device to your Mac or iPad Pro.

To charge an iPhone, iPad, or iPod touch from a Thunderbolt 3 or USB-C port without one of these adapters, you can use the Apple USB-C to Lightning Cable instead.

Ethernet

If you're using an Ethernet cable with your device, use a third-party USB-C to Ethernet adapter, such as the Belkin USB-C to Gigabit Ethernet Adapter.

Thunderbolt or Thunderbolt 2

If you're using a Thunderbolt or Thunderbolt 2 cable with a Thunderbolt display or other device, use the Apple Thunderbolt 3 to Thunderbolt 2 Adapter.

This is the correct adapter for the Apple Thunderbolt Display.

Thunderbolt and Thunderbolt 2 are not the same as Mini DisplayPort . They have the same shape, but use different symbols on the cable and port.

Mini DisplayPort

If you're using a Mini DisplayPort cable with a Mini DisplayPort display, use a third-party USB-C to Mini DisplayPort adapter. Check with its manufacturer for compatibility with your Mac and display model.

This is the correct solution for the Apple LED Cinema Display.

Mini DisplayPort is not the same as Thunderbolt or Thunderbolt 2 . They have the same shape, but use different symbols on the cable and port.

DisplayPort

If you're using a DisplayPort cable with your display, use a third-party USB-C to DisplayPort adapter or cable, such as the Moshi USB-C to DisplayPort Cable.

HDMI

If you're using an HDMI cable with your display, use the Apple USB-C Digital AV Multiport Adapter or a third-party USB-C to HDMI adapter or cable.

VGA

If you're using a VGA cable with your display, use the Apple USB-C VGA Multiport Adapter. Or use a third-party USB-C to VGA adapter, such as the Belkin USB-C to VGA Adapter.

DVI

If you're using a DVI cable with your display, use a third-party USB-C to DVI adapter or cable. Check with its manufacturer for compatibility with your Mac and display model.

Learn more

You can use your USB-C Power Adapter and charge cable with any Thunderbolt 3 or USB-C port on your Mac or iPad Pro.
If you have an Apple TV connected to your TV, projector, or other display, you can use AirPlay to wirelessly stream video to that display, or extend the desktop of your primary display.
Learn about using external monitors with your Mac.
Learn more about using the USB-C port on your iPad Pro.

Whether you’re starting a new home studio, or improving an existing one…

There’s no single purchase more confusing than the audio interface.

Because among the dozens of options…

Each one is designed to meet the demands of a specific “type” of studio.

For example…

At one extreme, a small $100 interface might be perfect in a simple bedroom studio…

If all you need is a single pair of outputs for your studio monitors.

At the opposite extreme, a pro studio that requires dozens of INs/OUTs might need several interfaces, each costing $4000 or more.

Needless to say, matching the right interface with the right studio is tricky even for the experienced. And for beginners, its 10x worse.

Which is why for today’s post, I’ve created an in-depth guide to help you find the perfect option for your studio.

So let’s get started. First off…

The 5 Key Features to Look For

Because of the fact that audio interfaces have so many features, it’s difficult to know which ones matter, and which ones don’t.

So let’s talk about that now. In particular, these are the 5 key specs to focus on:

DAW Compatibility
Interface Connectors
Input/Output (I/O) Count
Input Channel Types
Form Factor

And here’s why:

1. DAW Compatibility

In general, most DAW’s work with most interfaces…but not always.

If you don’t yet have a particular DAW that you are loyal to, then you need not worry here.

Because 90% of the top DAW’s will be compatible with any interface you choose.

However if you alreadyhave a DAW you want to continue using, be sure to verify compatibility on the company’s website. And just to warn you, this info is often hard to find.

You would think they would just post DAW compatibility in the interface’s product description, right? But it rarely happens. Usually it’s buried somewhere within an FAQ page.

While it’s not clear why this is done, my best guess is that these companies prefer not to advertise their current DAW compatibility, because they have no guarantees of future compatibility.

A particular interface might be compatible with your DAW today, but it may not be in a future release. And while that’s not likely to happen, it’s always possible.

Which is why personally, I prefer to use a DAW/interface combo made by the same company. Later in this post I will give you some good examples of these.

However, since there are only a few companies that make both, the downside to this solution is that it severely limits your options.

Up next…

2. Interface Connectors

When connecting an audio interface to a computer…

There are 4 cable options commonly used:

USB– which is typically seen on cheaper home studio interfaces, and offers the slowest data transfer rate.
Firewire– which is used on more expensive home studio interfaces, and offers a significantly faster transfer rate (nowadays these are becoming less common).
Thunderbolt– which has recently become popular with newer semi-pro interfaces, and is way faster than either USB or Firewire.
PCIE– which has long been the standard connection for professional interfaces, because it offers additional processing power and extremely fast data-transfer.

While USB is by far the slowest of all 4 options, it is still more than fast enough to get the job done for the vast majority of home studios.

So if you’re on a budget, USB is what I recommend.

But whichever type you choose, remember to double-check that your computer has the appropriate connection.

3. Input/Output (I/O) Count

On a typical interface, I/O counts can range anywhere between:

1-2 on a simple interface, to…
20+ on a professional one.

And the number you need for your studio depends mainly on the number of tracks you plan to record/monitor at once.

For example:

Solo musicians – may need only 2-4.
Songwriting teams – who work in small groups, want at least 4-8.
Engineers who record bands – should have as many as possible (16 at least).

Also…electronic drum kits alone can sometimes require 8 inputs if they offer separate channels for each part of the kit. So take that into consideration if you plan on using one.

4. Input Channel Types

One thing recording newbies often fail to realize is…

When counting the input channels of an audio interface, manufacturers could be referring to any number of different input types.

However in almost all cases, it includes some combination of these 3:

Mic Input – which allows you to connect a mic directly to the interface.
Line Input – which requires the addition of an outboard mic preamp to be used as a mic channel.
Optical Input – which is a type of “digital” input that requires the addition of BOTH an outboard mic preamp, and digital converter w/ “optical out” to be used as a mic channel.

Now here’s what this means for you:

If you want to use your interface “as-is” without adding a multi-channel mic preamp, you might have less available inputs than you think.

Because as you’ll notice, interfaces often have 16 or more total input channels, but only 2-8 mic inputs.

So without any additional gear, the “real” number of inputs on your audio interface is the mic preamp count, NOT the same as the input count.

Now that you know…make sure you actually have enough channels for your purposes. Otherwise you will be sorely disappointed.

NOTE: Two other input types that you should also look for are DI inputs (if you play guitar/bass), and MIDI inputs (if you use any type of keyboards/MIDI controllers).

5. Form Factor

A fancy jargon term used by computer geeks…

“Form factor” simply refers to the physical size and shape interface.

The two form factor options are:

Desktop Interfaces – which are smaller, and sit on your desk next to your computer.
Rackmounted Interfaces– which are larger, and mount in a standard size rack unit.

For beginners, I recommend starting with a desktop interface, because they’re cheap, easy-to-use, and require no special mounting or peripheral devices. You just plug them in and start recording.

With intermediate/advanced studios, rackmounted interfaces are typically better, as they tend to offer more I/O’s, as well as greater flexibility with signal routing and organization.

Now that you know what to look for, let’s check out some specific models.

Starting with…

Best Desktop Interfaces

For the vast majority of people reading this article, who only want a cheap interface that will allow them to record their music at home…

I recommend a 2-6 channel USB desktop interface, which normally costs between $100-$300 on the low-end, and $500-1500 on the high-end.

Currently, the top brands for these “types” of interfaces are Presonus, Focusrite, Avid, Universal Audio.

Here are the models I recommend from each brand:

Presonus AudioBox (USB connection)

(includes Presonus Studio One Artist DAW)

AudioBox USB – (Amazon/GuitarC/MusiciansF/Thomann)
AudioBox iTwo – (iPad Compatible) – (Amazon/GuitarC/MusiciansF/Thomann)
Audiobox 44VSL – (Amazon/GuitarC/MusiciansF/Thomann)

Who do I recommend these for? – Beginner studios on a tight budget who want a bundled interface/DAW combo.